Hostacom TRC 160Y HF NATURAL is a 14% mineral filled, polypropylene copolymer for injection molding. It combines excellent stiffness/impact balance, low odor and excellent flowability properties with good dimensional stability. It is typically used for molding paintable automotive interior trim parts.
Hostacom TRC 160Y HF NATURAL
Description
Availability
North America
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (230 °C/2.16 kg) | 33 g/10 min |
| Density | 0.99 g/cm³ |
| Tensile Modulus (1% Secant) | 1900 MPa |
| Tensile Stress at Yield (23 °C, 50 mm/min) | 22 MPa |
| Charpy Impact Strength - Notched (-30 °C, Type 1, Edgewise, Notch A) | 5.5 kJ/m² |
| Mold Shrinkage |
Technical Data Sheet
Technical Data SheetProcess
Injection Molding
Resin
Polypropylene Compounds
Applications
Interior Automotive Applications
Prohibited Applications of Compounded Polyolefins:
The following applications and/or end uses are prohibited by LyondellBasell. LyondellBasell will not solicit the sale of, or knowingly supply, product for use in the following applications:
FDA Class III medical devices, European Class III medical devices, Health Canada Class IV Medical Devices, applications involving permanent implantation into the body & life-sustaining medical applications